Drainage tray STANDART
The STANDART series surface drainage system belongs to the load classes A15, B125, C250, depending on the choice of the grid itself.
Drainage trays of the STANDART series are an ideal solution for surface drainage, it consists of a number of trays and sand traps that are perfectly connected to each other.
The surface drainage system of the STANDART series belongs to the load classes A15, B125, C250, depending on the choice of the grid itself. A powerful system of ribs gives the tray resistance to high loads.
Scope of application of this series:
- country houses for collecting water from the roof and terraces
- squares and parks
- bike paths
- sidewalks and pedestrian zones
- stadiums and playgrounds
- garages
The system reliably protects the foundation and the basement from dampness and destruction. It protects the adjacent territory from waterlogging and stormwater flows, and also lowers the groundwater level.
The STANDART series is:
1. Plastic trays with a height of 69 to 210 mm
2. Plugs and plug adapters for trays
3.Grating: plastic, stamped steel, cast iron slot
4. Fasteners for steel and cast-iron grilles
Hydraulic section of the tray 100 mm or 200 mm
Height of the trays:
Types of lattices:
